Відео

Dude you clone with more powerful mid motor? 120nm

Incredible video! Exactly what I was looking for, and the information provided was top notch. Also, the way you ended this video almost had me in tears. I have been living that way the past few years. Time moves so fast, and we all need to make the most of it. Too many times I have told myself "later" or "maybe tomorrow". Last year, tomorrow finally came. I began traveling again, and started my UA-cam Travel Channel I have been putting off for so long. Take care, be safe,, and enjoy every minute of your friends and family.

Are you able to larger wheels/tires on this trailer? Anyone know the maximum size? Hoping to make it a bit kore off-road capable.

Do they come in 6×8 or 6×10?

I'm based in europe and saw that. It feels like paper. Cheapish. I went with Fast Service trolleys and drawer boxes. It's like twice the weight... Not fully aware the size i took one MEGA trolley and stack-on-top box and one TRUCK series trolley. MEGA is 230+ kg! alone. Was not fully aware how big and solid those suckers aare but they are jewelery in my shop now😂

Get 5% off your new pool robot: bit.ly/3LmjYCp

Catfish is better than tilapia 😊

I ride a Fezzari Timp e-bike and it's the best thing ever. More miles, more smiles! I've lived in a lot of places in utah, north, south, some spots in texas as well, and nothing has MTN Biking like Utah County! From my house I can get pretty much to any trail in about 30 minutes. Utah's the best!

Thats sick. If you are still here, you have to get over to draper and the Corner Canyon trails. Rush, Vertigo, Levitate, Zooropa, Ghost falls, the draper area is fantastic.

They sell Intex adapters that fit directly to female threaded 1.5". I've used these extensively in my PVC system to make coupling it to the Intex equipment much easier. Finally got all the air leaks out of my system! Zero bubbles in the basket!

Can you replace the rear shock with adjustments for heavier riders?

I bought my bike in 2019. Didn't get a flat until 2023. Even then not sure what i ran over. But it took a chunk out of my tire, put a dent the my Tannus Armour, and just barely punched thru my inner tube causing a small air leak. They work really well. Id suggest these to every bike rider!

Hey bud, Thanks for your review! I would like to ask please. Could I swap my 1500 model batteries out for LifePo and make external ports to charge them do you know? I have RC car Chargers that will charge that type of battery. That part I'm familiar with... unless they need balancing ports..idk. what are your thoughts on this please? Thanks in advance!

no Ebikes allowed in parck cityy single track unless for special exceptions

Actually on the offset the dewalts profile is slightly lower. It’ll get into any tight corner that you need it too. Been using mine now for a while doing cabinets and I’ve had zero issues. Not to mention the Milwaukee is a lot longer making it less than ideal for right spaces. Your Milwaukee looks pretty beat up while the Dewalt looks new. My guess is that you’re a Milwaukee fanboy.

I have several Milwaukee impact guns and drills and they SEVERELY out perform my snap-on guns, matco guns and everyone else at the shop bought Milwaukee after they found out how well they work. This man knows nothing.

Just go to HF and get one

I recently got gen 4. Rail 9.8 in red color. Im very tall, got XL. What an absolute tank of a bike it is. I also have 2022 Trek Slash 9.8 XT which is an animal in itself. But rail exceeded my expectations. I was very worried because i payed alot of money for it although i got it on a Trekfest nice price cut. But after i picked the bike from the story. Jesus my remorse was gone in ten minutes. It made feel like Jim Carrey from Bruce almighty when he gets his powers and the song "i got the power" played haha. Only thing i didnt like was that select+ rear shock. Does not feel good compared to my ultimate on trek slash. Ill swap it sometime soon to Vivid ultimate. Also Trek bikes are usually pretty eyecatchy. I was getting alot of attention for my Slash. But this thing, with flashy red color in XL looks like a transformer. I cant even count how many people commented the bike looks past month lol. Trek makes best looking bikes imo. pretty much lamborghini of bikes. My problem with those third party companies making carbon frames is that its risky, because high end brands do alot of testing on their frames for defects which can save lives.

There is a spot in the video where you can read "180mm" on the brake rotor and you say later it is 160mm. The quality of the focus is so bad, and the camera man technique is "cool flight" skip-over style, that you can't be sure if it really says 180mm. I am a bit peaved, I fight and fight to gather the true facts on all kinds of bike and the vid producers are formulaic just to appear cool. This style fails on SO MANY POINTS (you did a fairly good vid). For Horizon, I want BMX handlebars (still exists?), alloy spokes, availability of replacement brake pads, adjustable air-shocks, and a shock-seat post. You need extra battery for range. 203mm or 315mm discs is important, I say. How good is service from Heybike company? So many bikes get bad review for the service. This is a sick reality and I hesitate to buy an e-bike.

The instructions state that you should not have to tap or bump the locking arms to engage the puck system, so if your hitting it , its way too tight, ....and yes the arms matter, you have them in the forward most position, that's about 3" ahead of the axle, if you flip them around its about an inch ahead of the axle, so cab clearance could be an issue, ........and we have many years of towing and that pin is definitely not an issue, ....go buy a padlock and put that in there if you are that bothered.

I have both amd milwaukee is so much better

2500 bucks for 650 watt hours is a RIPOFF!!!! I PAID 3100 BUCKS FOR 3108 WH WITH 800 WATT SOLAR PANELS.

they are for light 5v

What about putting and intake on the floor of the pool

Do NOT use an air wrench to put it on!!

I have the last one great tool!

I got one of these as a temporary "throwaway" trailer for a yard project. That was ten years ago and it's hauled tons of junk and dirt for thousands of miles! Just be aware of rust- the finish is trash and it'll rust right out from under you if you don't get after it

You don’t even need to own either one of those boxes to know that Milwaukee box is way better quality than husky. I’ve looked at both brands before when looking for a toolbox and the husky you could just about poke your finger through that flimsy crap. Milwaukee feels a lot more durable and the drawers slide better than the husky.

That is pretty cool guys. Thanks for sharing.

I got the m620 , and it fast

❤

I have Bestway 20’x12’ 48” deep but it came with a nice sand filter. So far for the past month it stays crystal clear. Brush and use a water jet vacuum on a pole that just squirts debris into a mesh bag but it’s great. I think you might try to pay more attention to the landscape around the pool. If nothing else just some quality weed barrier. Try to keep as much dirt transfer from your feet to the inside of the pool. I haven’t done anything other than weed barrier around my pool and that helps a ton. The rest of my backyard is concrete and landscaped with grass. The area where our pool is located was a playground with bark once I removed all that stuff it was bare dirt so I covered it with barrier with plans to put synthetic grass next year but I’m already eyeballing a bigger Intex 12’x24’x52” 😂

How much?

Got one seven years ago and love it so much. Easy build and if you want to deck it, one sheet of playwood is all need. Total cost was under $300 at the time.

Why people love Milwaukee products so much is because of their chordless powertools. But then advertising hooked lots of people. But many products are pretty shitty and over-priced compared to competetors.

I don’t know sh*t about plumbing, in facts I hate pipes, but im doing this! Thank you for the video

I use the Milwaukee on cars all the time, I build custom Corvettes and there is a lot of tight spaces. Most other tools can’t get into and it is perfect for that

My snap on just fine

Your pool is so not level

I just rebuilt one from the mid 80's. It looked rough, but after dissasembling it, all it really needed were lights and tires due to dry rot from sitting, as well as a sheet of plywood. I replaced the bearings and seals, but the original sets looked fine. It probably didn't need it. I installed new wiring, just because, but the old wiring worked fine too. After slapping a coat of paint on it and a new deck, it's ready to go for another 30+ years.

No mention of bonding or grounding?

If you hold the hose over the jet that blows water out until it bubbles, it will get the air out of the hose. Then you can hook the hose to the suction side.

Thanks for zero explanation

The 6.0 HO has Samsung t30 cells that are actually more powerful then the 8.0ah and 12.0ah HO’s that have t40 cells. The t40 cell last longer but the t30 stays cooler and discharges more amps with a lower voltage drop, comparable to the new Forge battery

The blue part for me keeps coming off

I can NOT get the screws to line up with the holes on the unit. Driving us crazy!!

Have you ever thought about being saved Jesus died on the cross for our sins and rose from death 3 days later so we could have enteral life in heaven confess your sins and accept Jesus as your savior and Lord over your life and believe that God raised Jesus from the dead and confess with the mouth Jesus is Lord Romans:10-9KJV That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead, thou shalt be saved.

I had a smaller version of it where the tongue bent in normal use. Then the lug nuts froze up with rust. At least use acorn nuts instead. My previous trailer was 4' wide. I quickly realized the shortcomings of the narrow width. I now have a 5' wide one and I find it to be much more useful. The other problem with 4' wide is when people build teardrop campers on them. They're ok for one person, but very cramped for two people.

Dag wish I had those skills, would be awesome savings. Guess I'll be buying the kit and install 😂😮

You FORGOT to put screws in the flange repair ring/secure it to the floor? Or you could have filled that hole around the flange pipe with hydraulic cement sets in about 30 minutes